TP-Link.Neffos Y7 Dump File

Image
                                                     File Password Protection  TP-Link Neffos Y7 Dump File with user-part & 100% tested not free  price 200Tk Init bus... VCC: 3.3 V, VCCQ: 3.0 V Bus: 1 bit (SDR 52MHz) Access mode: sector mode Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)  Card/BGA: BGA (Discrete embedded) - High density MMC  Manufacturer ID: 0x15 (Samsung)  Product name: QE63MB (0x514536334d42), rev: 0x03, serial number: 0xC4CBD3F1  Manufacturing date: Mar 2018 CID: 15010051 4536334D 4203C4CB D3F13586 CSD: D0270132 0F5903FF F6DBFFEF 8E40400C Firmware version: 0x03 EXT_CSD revision: 1.8 (MMC v5.1)  Partition info:  Boot1: 4 MiB  Boot2: 4 MiB  RPMB: 4 MiB [Provisioned, User area: 14.56 GiB(15,634,268,160 bytes) Download only paid call...+8801710445133

SYMPHONY V128 NVM file For Free or 100% tested_janani_MMK

Connecting to Download port...
 Make sure battery is fully charged before flashing !!!
 Power off the phone, Disconnect and reconnect the battery(if possible), Hold the VOL DOWN or VOL UP+DOWN and connect USB cable
 Scanning Download port... Done
 Detected SPRD U2S Diag (COM10)
 Connection status: XHCI:HUB3:USB 2.00 High-Speed
 USB Driver: [DriverCoding Corporation] sprdvcom, version: 2.0.0.131, date: 3-4-2015
Boot id: SPRD3
Sending FDL ... Done
Boot version: Spreadtrum Boot Block version 1.1
Change baudrate to 460800 ... Done
Sending NAND_FDL ... Done

platform: , cpu abi: armeabi-v7a
manufacturer: SYMPHONY
board: , name: V128
brand: SYMPHONY, model: V128
build id: O21019, version: 8.1.0 Oreo (V128_HW1_V9)
build description: V128-user 8.1.0 O21019 1552471244 release-keys


Backing up NV...
Reading prodnv, size: 5 MiB... Done
Reading w_fixnv1, size: 1 MiB... Done
Reading w_fixnv2, size: 1 MiB... Done
NV Backup saved to \\F:\Flash%20File\Read%20File\Symphony\SYMPHONY_V128[V128-user%208.1.0%20O21019%201552471244%20release-keys](20191205-103005)_nvm.zip
                                                               


  


Password= MMK5133



















Comments

  1. Your Affiliate Profit Machine is waiting -

    And making money with it is as simple as 1---2---3!

    Here are the steps to make it work...

    STEP 1. Tell the system which affiliate products the system will advertise
    STEP 2. Add PUSH BUTTON TRAFFIC (this ONLY takes 2 minutes)
    STEP 3. Watch the affiliate system explode your list and upsell your affiliate products on it's own!

    Are you ready to make money ONLINE???

    The solution is right here

    ReplyDelete

Post a Comment

Popular posts from this blog

TP-Link.Neffos Y7 Dump File