TP-Link.Neffos Y7 Dump File

-
Image
                                                     File Password Protection  TP-Link Neffos Y7 Dump File with user-part & 100% tested not free  price 200Tk Init bus... VCC: 3.3 V, VCCQ: 3.0 V Bus: 1 bit (SDR 52MHz) Access mode: sector mode Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)  Card/BGA: BGA (Discrete embedded) - High density MMC  Manufacturer ID: 0x15 (Samsung)  Product name: QE63MB (0x514536334d42), rev: 0x03, serial number: 0xC4CBD3F1  Manufacturing date: Mar 2018 CID: 15010051 4536334D 4203C4CB D3F13586 CSD: D0270132 0F5903FF F6DBFFEF 8E40400C Firmware version: 0x03 EXT_CSD revision: 1.8 (MMC v5.1)  Partition info:  Boot1: 4 MiB  Boot2: 4 MiB  RPMB: 4 MiB [Provisioned, User area: 14.56 GiB(15,634,268,160 bytes) Download only paid call...+8801710445133
Post a Comment

Symphony V42 Flash File 6.0 (CM2)

-
                                                                                 DOWNLOAD   
Phone found! [ 4 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0  
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 4 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0  
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 4 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0  
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : V42
Model Brand : Symphony
Model Device: V42
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
Project Ver : V42_HW1_V5
Model Ext   : V42

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
Skip [NID] : WFIXNV1
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
Skip [NID] : WCNFIXNV1
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2039 MiB
Saved to : C:\Users\Janani Telecom\Desktop\New folder (3)\SP7731CEB_V42_6.0_V42_HW1_V5_V42\
Done!

Comments

Post a Comment

Popular posts from this blog

SYMPHONY V128 NVM file For Free or 100% tested_janani_MMK

-
Image
Connecting to Download port...  Make sure battery is fully charged before flashing !!!  Power off the phone, Disconnect and reconnect the battery(if possible), Hold the VOL DOWN or VOL UP+DOWN and connect USB cable  Scanning Download port... Done  Detected SPRD U2S Diag (COM10)  Connection status: XHCI:HUB3:USB 2.00 High-Speed  USB Driver: [DriverCoding Corporation] sprdvcom, version: 2.0.0.131, date: 3-4-2015 Boot id: SPRD3 Sending FDL ... Done Boot version: Spreadtrum Boot Block version 1.1 Change baudrate to 460800 ... Done Sending NAND_FDL ... Done platform: , cpu abi: armeabi-v7a manufacturer: SYMPHONY board: , name: V128 brand: SYMPHONY, model: V128 build id: O21019, version: 8.1.0 Oreo (V128_HW1_V9) build description: V128-user 8.1.0 O21019 1552471244 release-keys Backing up NV... Reading prodnv, size: 5 MiB... Done Reading w_fixnv1, size: 1 MiB... Done Reading w_fixnv2, size: 1 MiB... Done NV Backup saved to \\F:\Flash%20Fi...
Read more

TP-Link.Neffos Y7 Dump File

-
Image
                                                     File Password Protection  TP-Link Neffos Y7 Dump File with user-part & 100% tested not free  price 200Tk Init bus... VCC: 3.3 V, VCCQ: 3.0 V Bus: 1 bit (SDR 52MHz) Access mode: sector mode Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)  Card/BGA: BGA (Discrete embedded) - High density MMC  Manufacturer ID: 0x15 (Samsung)  Product name: QE63MB (0x514536334d42), rev: 0x03, serial number: 0xC4CBD3F1  Manufacturing date: Mar 2018 CID: 15010051 4536334D 4203C4CB D3F13586 CSD: D0270132 0F5903FF F6DBFFEF 8E40400C Firmware version: 0x03 EXT_CSD revision: 1.8 (MMC v5.1)  Partition info:  Boot1: 4 MiB  Boot2: 4 MiB  RPMB: 4 MiB [Provisioned, User area: 14.56 GiB(15,634,268,160 bytes) Download only paid call...+8801710445133
Read more